Question: Where can I get Tray Holder TUH164 for Tuttnauer Model?
Answer: You may get the Tray Holder TUH164 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
Size: 5.46″ x 12.25″
Material: Stainless steel
Included in: Holder and Tray Kit
Also available: Tray (Wire) , Tutt-Clean™
Box of 10 packets, Cleaning Kit and
Sci-Dry (2 oz. Bottle)
Fits: Chamber
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Holder and tray kit TUK163 for Tuttnauer Model?
Answer: You may get the Holder and tray kit TUK163 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
ncludes: Tray Holder and (3) Tray
(Wire)
Also available: Tutt-Clean™ Box of
(10) Packets, Cleaning Kit and Sci-Dry
(2 oz. Bottle)
Fits: Chamber
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Fuse (1-1/4A, 250V) – 1/4 X 1-1/4 – FAST ACTING RPF 073 for Tuttnauer Model?
Answer: You may get the Fuse (1-1/4A, 250V) – 1/4 X 1-1/4 – FAST ACTING RPF 073 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
5 per package
Type: Glass; AGC Fast Acting
Size: 1/4″ dia. x 1-1/4″ lg.
Also in Fuse Kit
Fits: Air Pump Fuse Holder
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Heat Sink Compound RPC464 for Tuttnauer Model?
Answer: You may get the Heat Sink Compound RPC464 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
5 per package
Size: .07 fl. oz (2ml)
Non-Silicone based thermal grease
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Fuse (2A, 250V) – 1/4 X 1-1/4 – Fast Acting RPF047 for Tuttnauer Model ?
Answer: You may get theFuse (2A, 250V) – 1/4 X 1-1/4 – Fast Acting RPF047 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
5 per package
Type: Glass; AGC Fast Acting
Size: 1/4″ dia. x 1-1/4″ lg.
Also in Fuse Kit (RPI Part #RPK410)
Fits: Air Pump Fuse Holder
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Fuse Holder RPH659 for Tuttnauer Model?
Answer: You may get theFuse Holder RPH659 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
3/16″ Quick Connect Tabs
Uses standard 3AG (1/4″ dia. x 1-1/4″ lg.) fuse
20A @ 250VAC
Low profile screwdriver slot knob
Suggested mounting hole size: 1/2″
Includes mounting hardware
Fits: Rear Panel
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Solid State Relay( Heater) TUR104 for Tuttnauer Model ?
Answer: You may get the Solid State Relay( Heater) TUR104 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
1.80″ W x 2.30″ L x .90″ Thk
SPST – N.O.
Current rating: 25A @ 24-280 VAC
Control voltage: 3-32 VDC
Includes: Terminal hardware, Clear Plastic Cover, and (one tube) Heat Sink Compound
Fits: Chassis
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Wrench (low profile) RXT003 for Tuttnauer Model?
Answer: You may get the Wrench (low profile) RXT003 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
Material: Stainless steel
Double Ended Flat Wrench: 7/16″ x 10mm
Used to secure the valve stem flat on Medivators pneumatic valve.
Used on Tuttnauer sterilizer Leveling Feet and Air Jet Valves.
Included in: PM Kit and PM Kit
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Cable (Tie6WHITE) RPT661 for Tuttnauer Model?
Answer: You may get the Cable (Tie6WHITE) RPT661 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
25 per package
1/8″ x 6″ lg.
Material: Nylon
Also available: Cable Tie Tool
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert
Question: Where can I get Power Supply TUP106 for Tuttnauer Model?
Answer: You may get the Power Supply TUP106 for Tuttnauer Model for Tuttnauer Sterilizer model HERE
Details
45W dual output switching Power Supply
Input voltage: 90 to 264VAC
Output voltage: Ch.1=3.2A@5VDC; Ch. 2=2A@12VDC
Fits: Chassis
Thank you –
~Shlomo Savyon
1-800-762-1586
Your Sterilizer expert