{"id":728,"date":"2017-08-11T13:35:17","date_gmt":"2017-08-11T13:35:17","guid":{"rendered":"https:\/\/learn.sterilizers.com\/?p=728"},"modified":"2017-08-14T04:03:27","modified_gmt":"2017-08-14T04:03:27","slug":"cox-dry-heat-sterilizer-cylinder-filled-water-cycle","status":"publish","type":"post","link":"https:\/\/learn.sterilizers.com\/blog\/cox-dry-heat-sterilizer-cylinder-filled-water-cycle\/","title":{"rendered":"Pelton Crane – Chamber Filled with Water After Cycle is complete"},"content":{"rendered":"
This can be caused by either bad fill solenoid valve, or debris in the piping system of the fill line.<\/p>\n
Run the sterilizer up to the operating pressure and temperature.
\nTurn the bottom knob to ‘fill position’.
\nGive it a minute or two for venting to complete.
\nThis should blow out any debris in the line and solenoid.
\nIf after doing this you still have the problem, replace the Solenoid<\/span><\/strong>.<\/a><\/p>\n